Sony HDC-P1


Sony HDC-P1





Uncompromising, Full-HD performance from compact camera

There is increasing demand for small "Box"-type or "Point-Of -View" cameras with the flexibility to shoot from almost anywhere while still delivering highest quality full-HD pictures for use standalone or in seamless integration with content from full-size cameras. The HDC-P1 delivers unprecedented picture quality thanks to its full use of the technologies from Sony's flagship HDC Series studio cameras. Three 2.2-million pixel 2/3"-inch type Power HAD FX CCDs and a 14bit A/D converter offer a sensitivity of F11 at 1080/50i. A wide range of recording formats are supported, including 1080/50i, 59.94i and 720/50P, 59.94P, with 23.98PsF, 24PsF, 25PsF, and 29.97PsF capabilities available via optional software upgrades (due Summer 2010).

It is also the first camera of its class to feature dual ND/CC filters, both of which are servo controlled, and its ultra-narrow, 86mm body makes it ideal for applications such as 3D. Other applications include a range of unmanned and point-of-view HD applications, such as stadiums, conference rooms and schools. It can also be used as a "companion" camera in automated broadcast studios.

 

2/3" full HD "Power HAD FX" CCDs and 14-bit A/D converter

The camera has a 14-bit A/D converter with a sensitivity of F11 at 1080/50i. It supports a range of recording formats including 1080/50i, 59.94i and 720/50P and 59.94P. 23.98PsF, 24PsF, 25PsF, and 29.97PsF capabilities will be available via optional software due in Summer 2010.

Compact and Lightweight Design

The HDC-P1 weighs only 1.7 kg (3 lb 12 oz) and its dimensions are a compact 86mm(W) x 130mm(H) x 189mm(D), allowing easy installation in space-constrained and awkward areas such as on a crane head or helicopter.

Two remote control optical filters

The HDC-P1 is the first camera of its type with two optical filters - Neutral Density (ND) and Colour Correction (CC) - to provide more flexibility under changing lighting conditions and easier picture matching with full size system cameras. Both filters are servo driven so they can easily be controlled remotely.

Equivalent picture quality and control system as standard Sony HD camera system

The HDC-P1 camera not only delivers comparable picture quality to a full-size Sony system camera, it is also fully compatible with Sony's current Master Set-up Units (MSU) and Remote Control Panels (RCP) using 700 Protocol - the same control system as HDC Series Cameras. This flexibility allows for comprehensive camera systems or simple point-to-point systems.

 

Technical Specifications

Please be aware that the features/specifications can differ from country to country

Collapse all

General

Operating temperature

-20 to +45 °C (-4 to +113 °F)

Mass

Approx. 1.7kg (3 lb 12 oz, without VF and lens)

Camera

Pickup device

3-CCD 2/3-inch type 16:9

Effective picture elements (H&V)

1920 x 1080

Spectrum system

F1.4 prism system

Built-in filters

1: Clear, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND A: CROSS, B: 3200K, C: 4300K, D: 6300K

Servo filter control

Yes

Lens mount

Sony 2/3-type bayonet mount

Sensitivity

F11 at 2000 lx (3200K, 89.9% reflectance)

Signal-to-noise ratio

Typical -55dB

Horizontal resolution

1000 TV lines (at Centre)

Shutter speed selection

1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 s (1080/50i mode)

Modulation depth

45% or more horizontally (800 TV lines at centre, 27.5 MHz, with typical lens), Pb/Pr: 80% of 12 MHz

Input connectors

Genlock input

BNC type (1), 1.0 Vp-p, 75? HD: SMPTE-274M, tri-level sync, 0.6 Vp-p, 75? SD: Black burst (NTSC: 0.286 Vp-p, 75?/PAL: 0.3 Vp-p, 75?) or NTSC 10F-BB

Output connectors

SDI 1/2 out

BNC type (2), HD-SDI/SD-SDI selectable

VBS out

BNC type (1)

Input/ouput connectors

EXT I/O

D-sub 15Pin (female)

Lens

12-pin

Remote

8-pin

LAN

RJ-45 (1), 10Base-T/100Base-TX

Supplied Accessories

Operation Manual

 

Tally number plate


For further information please visit this product's homepage.



Band Pro Munich GmbH
Karl-Hammerschmidt-Str. 38
85609 Dornach b. München
Germany

Tel: +49-89-9454849-0
Fax: +49-89-9454849-9
email: info@bandpro.de

PARTNER NEWS »