The WM-3209 is a waveform monitor that has various 3D functions.
Two channels (Lch&Rch) of waveforms, vector scopes and pictures can be
displayed simultaneously so that it is useful to compare the two channels.
Adjusting two cameras with these functions, miss match of Lch and Rch that
causes failure of 3D picture can be prevented.

• Parallax in %: Parallax measured by cursor is displayed in % of total pixels, 1920 dots.
• Parallax in cm: Simulated parallax is displayed in cm or inch. i.e how the parallax will be on a larger display.
• Checker board: Checking height difference of Lch&Rch more easily.
• Y difference: Parallax is enhanced in B&W image. It is convenient for checking parallax and gap of V direction.
• Flip: For mirror rig, picture of designated channel can be flipped for V or H+V for 3D viewing. (display only, no loop out)
• Anaglyph: Anaglyph image for 3D viewing.

• 3G-SDI input: 3G-SDI input is supported.
• ID display： ID for each selected channel is displayed. UMD is also supported (available only on the WM-3209-L)
• Battery mount adapter: Battery adapter for V mount battery. Battery level meter is available (only on the WM-3209-B)
• Headphone terminal: Selected 2ch audio can be monitored via the headphone terminal.
• GPI: GPI for channel select, load of preset data etc.

INPUT:

3G/HD/SD-SDI:2CH、Dual Link:1CH、VBS:1CH、REF:1CH(Tri-level, BB)

STANDARDS:

3G-SDI:SMPTE425M、Dual Link:SMPTE372M、HD-SDI:SMPTE292M
SD-SDI:SMPTE259M、NTSC:SMPTE170M、PAL:BT624-4(Partially)

VOLTAGE / POWERCONSUMPTION:

DC12V(DC10V-18V)/24W

DIMENSIONS/WEIGHT:

215(W)x177(H)x90(D)mm/ Approx.2kg