The LV 5700A is a waveform monitor for HD-SDI and SD-SDI signals. Employs color TFT LCD screen. The functions of waveform monitors, vectorscopes, audio lissajous, and simple picture monitors are achieved with a single unit. Complete digital processing of SDI signals enables highly accurate measurements. In addition, extensive error detection functions and analysis functions are provided which allow the LV 5700A to be used as SDI signal monitor.

• Two serial digital input systems
  The SDI input connector on the LV 5700A supports free rates. Thus, either HD-SDI or SD-SDI signals can be applied to the same connector. You can select auto or manual setting for the input signal format.
• Display
  Employs an LCD monitor with XGA resolution. Various displays such as waveform display, vector display, picture display, and status display can be placed side by side on the XGA monitor. You can monitor these displays simultaneously. Depending on the combination, bowtie, embedded audio, and data dump can also be displayed. Furthermore, each display can be magnified.
• Operation
  The LV 5700A can be controlled through the panel and remotely controlled through a computer via the Ethernet network. In addition, presets can be recalled using the remote connectors on the rear panel.
• Extensive Analysis Functions
  The LV 5700A can also be used as an analyzer to detect multiple types of transmission errors, detect gamut errors, display data dumps, analyze the contents of voice control packets, measure the equivalent cable length, and so on.
• Output
  Equipped with two active output connectors that reclock the input signal. One connector is an HD-SDI/SD-SDI switching type serial output; the other is a dedicated SD-SDI output. Other output connectors are the analog picture monitor output and the AES/EBU output that separates the embedded audio in the SDI signal. An analog XGA output connector is also provided allowing the screen to be displayed on an external monitor.
• External Synchronization
  Allows tri-level sync signals or B. B signals of NTSC and PAL to be input.
• SDI-EXT REF Phase Difference Display Function
  The SDI-EXT REF phase difference display function shows the phase difference between the SDI signal and the external sync signal (EXT REF).
• 5 BAR DISPLAY
  Peak levels of video signals can be displayed in place of the vectors.